Heating & cooling
Heating and cooling, done by the license it needs
Furnaces, air conditioning, heat pumps and mini-splits, installed and serviced by a licensed mechanical contractor working alongside us — with the framing, the drywall and the making good around the equipment done in-house. New as a named service here, and this page says so plainly.
Can a handyman replace a furnace in Michigan?
No, and anybody who tells you otherwise is the person to walk away from. Heating and cooling equipment is licensed mechanical work in Michigan, which means it is performed by a licensed mechanical contractor and the permit for it goes in that contractor’s name. That is exactly how this is sold: you deal with us, a licensed mechanical contractor does the licensed work, it appears on your quote as their own line so you can see which half is which, and the building work around it — the framing a mini-split head needs, the closet a furnace has to come out of, the drywall and the paint afterwards — is ours. The reason that is worth having in one place is that the equipment and the building are usually two trades, two quotes and two visits that each wait on the other.
What we have actually done
Straight about the record, because it is the shortest one on this site. No heating or cooling job has ever been invoiced by this business. Not a furnace, not an air conditioner, not a heat pump. One ductless mini-split installation was quoted and accepted and then cancelled before any work happened, and it was never invoiced — so there is not even a completed job behind the one quote that exists. What is demonstrated is the work that sits around the equipment and the work that measures it: framing, drywall, carpentry and making good are invoiced every month, and this site already carries four pages that measure combustion, venting, ductwork and extraction and hand you the reading. What is new is the equipment itself, and it is new because of who does it rather than because nobody could: a licensed mechanical contractor performs it as a subcontractor, which is the arrangement that makes this sellable at all. That is a capability and a subcontract, not a track record, and you should read it as exactly that.
- Kinds of work on this page
- 1
- Invoiced jobs behind them
- None yet
- Case studies
- None yet
- Towns with work on record
- None yet
Counted across every kind of work listed on this page, from our own invoices. Read the paragraph above it for which of them has been sold under this name and which has not — the two are not the same number and this page does not let them blur.
What this actually covers
Taken from the scopes on our own invoices rather than from a list of services, so it is the work as it was actually bought.
Heating & Cooling (Subcontracted)
Furnaces, air conditioning, heat pumps and mini-splits installed, replaced and serviced by a licensed mechanical contractor, arranged and co-ordinated through Haslett alongside the building work around them.
- Furnace replacement and installation
- Air conditioning and heat pump replacement and installation
- Ductless mini-split installation
- Heating and cooling service, repair and seasonal checks
- Ductwork alteration and replacement associated with the equipment
- The carpentry, drywall, framing and making good around the installation, which is the in-house half
What it costs, and what that is based on
There is no figure on this page and there is nothing to derive one from, which is a different situation from the rest of this site. The equipment, the load calculation and the licensed labor are priced by the mechanical contractor and arrive as their own line; the building work around it is quoted at the published rate for labor with materials at cost, the same as everything else here. You get both halves in one written quote before anything starts.
There is no figure below, and there is no invoice record to derive one from either. This is one of the services this site sells with no job of its own behind it yet — the paragraph further up says so in plain words, and the count above this one reads None yet for the same reason. What is printed underneath is what the record actually holds, which here is nothing. A band assembled out of adjacent work would arrive on the page looking exactly like a price somebody had paid.
Heating & Cooling (Subcontracted)
Quoted per job. Nothing in eleven months of invoices prices this on its own, so there is no figure to publish and none is invented here. It is quoted after a look, in writing, before anything starts.
The counts on this page were read line by line out of 337 QuickBooks invoices covering 709 line items, alongside 289 job records and 84 customer quote documents. They are counts of work, not of money: what this service has been charged elsewhere was charged for a specific property under a specific arrangement, and it is not published here because it would not be your price.
The terms, in full
There is no charge for turning up, looking, or coming back.
Coming out
No charge
No trip charge, no call-out minimum, no diagnostic fee, and no charge for a return visit. Attendance and diagnosis of what you reported are included in the job price. True on all 84 written quotes this company has issued.
Materials
At cost, no markup
Supplied at cost with the receipt attached, and not discounted either — there is no margin in them to discount. Across eleven months of invoices, materials are $10,080 of $210,693 billed on labor-and-materials lines: 4.8%.
Anything outside the quote
$65 an hour plus materials
And only with your approval, in writing, before it is done. A fixed price is not a promise that nothing will be found behind a wall — it is a promise that you decide about it before it is billed rather than after.
Warranty
1 year on all labor
Two years on PVC trim installation and on flooring, stair and trim-joint work. Materials you supply yourself are not covered — our work on them is.
Payment
50% / 50%
Half on signing, which secures the date and buys the materials, and half on completion. A labor-only quote carries no deposit at all, because a deposit exists to purchase materials and that quote has none.
First-time customers
10% off labor
Applied to labor only, because materials are already at cost.
Returning customers
10% to 15% off labor
Every returning customer keeps 10%. 3 paid jobs, or $5,000 paid, in the last 24 months earns 12%; 6 paid jobs, or $15,000 paid, in the last 24 months earns 15%. Labor only, one discount per quote, counted from jobs that are paid. Your level and what the next one needs are in the client app. Property managers and commercial accounts are quoted on business terms instead, and neither the first-time nor the returning discount applies to them. Discount levels have no cash value and the program may change, but a quote already sent never does.
Where we stop
A contractor who writes down what they will not do is worth more than one who says yes to everything. These are the boundaries our own quotes already carry, in the same words.
- The licensed mechanical work is performed by a licensed mechanical contractor. It is their line on the quote, priced as theirs, and the permit and the inspection for that part are in their name — because that is whose license the work goes on. Nothing on this site is sold as something it is not.
- No track record is claimed for the equipment. There is no invoiced heating or cooling job in this business and the paragraph above says so rather than leaving you to work it out. If you want somebody with twenty furnaces behind them this year, that is a fair thing to want and we will say so.
- Sizing is not guessed and it is not ours to guess. The equipment is selected by the mechanical contractor off a load calculation for your house, not off the rating plate of whatever is in there now — which is how a house ends up with a second oversized furnace that short-cycles exactly like the first one did.
- Combustion and venting testing is measurement and a written report, and it stays that way. Where a reading says the appliance itself is at fault, the repair is the mechanical contractor’s and it gets booked rather than handed back to you. The person taking the reading is not the person who prices the fix, and the report is yours in writing whatever it says.
- Duct cleaning is a different service and is not part of this. Sealing or replacing ductwork associated with the equipment is; an air-quality treatment is not, and the two get sold together far too often.
- Duct insulation, boiler lagging and register mastic in a house built before about 1990 are treated as asbestos-containing until a sample says otherwise. They do not get cut, stripped, swept or sealed over, and sampling comes first. That is a safety line, it is the same one the insulation pages carry, and it does not move for a schedule.
No case study for this one yet
We only publish jobs that are finished, invoiced and photographed, and none of the six written up so far is one of these. Rather than illustrate this page with somebody else’s work, it says so. The six that do exist are here.
Where we work
All ten towns below, on the same terms — no trip charge and no call-out minimum anywhere in them. This particular service has no completed work filed against a town yet, and the pages say so rather than implying otherwise.
Questions we get asked about this
- Who actually does the work?
- The licensed mechanical part is done by a licensed mechanical contractor, and it is written on the quote as their own line with their own price so you can see it. The building work around it — opening a closet up, framing for an indoor head, boxing in a line set, drywall, trim and paint — is done by us. You get one quote, one schedule and one person to ring, and you can still see which trade is doing which half.
- Whose name is on the permit?
- The licensed mechanical contractor’s, because that is whose license the permit is issued against. That is the right answer from anybody you ask, and it is worth asking: if somebody wants to do mechanical work on your house and cannot pull the permit in their own name, that tells you what you need to know. It is the same question this site tells you to ask about electrical work.
- Have you done this before?
- Not on any invoiced job, and we are not going to claim we have. One mini-split installation was quoted and accepted here and then cancelled before it started, and nothing was ever invoiced. What is new is the equipment; what is not new is everything around it, and what makes it worth buying here is that the licensed half is performed by somebody who holds that license rather than arranged for you to chase.
- My furnace has stopped. Is this the page for that?
- If it is a safety question, no — go to the combustion testing page or, if a carbon-monoxide alarm is sounding, leave the building and call 911 or your gas utility from outside rather than booking anything. For a furnace that has simply stopped or is heating badly, yes: the diagnosis and the repair are a licensed mechanical contractor’s and get booked through here, and you are told what it is before anybody talks about replacing it.
- Can you do the heating and the building work as one job?
- That is the reason this is on the site. A furnace coming out of a tight closet, a mini-split head going on a wall that needs blocking, a return cut into a ceiling that then needs patching and painting — those are two trades and they are usually two quotes, two schedules and a week of each waiting on the other. Here the mechanical work is on one quote with the carpentry and the making good, and whoever has to go second is already booked.
- Do you charge a call-out fee or a trip charge?
- No — and no diagnostic fee and no charge for a return visit either. Attendance and diagnosis of the items you reported are included in the job price, and there is no minimum charge and no call-out minimum on any of the 84 written quotes this company has issued. Where a job is far enough out to need several days of round trips, a mobilisation figure is agreed with you in writing before anything starts, or the schedule is compressed into fewer longer days instead.
- What happens if the job turns out to be bigger than the quote?
- It becomes a written change order, priced and agreed before the work goes ahead, and it appears on the invoice by name. Anything outside the written scope is $65 an hour plus materials, and only with your approval — that rate is printed on every quote this company issues.
- Do you mark up materials?
- No. Materials are supplied at cost with the receipt attached, and the invoice record says so rather than the marketing: across eleven months, materials are $10,080 of $210,693 billed on labor-and-materials lines, which is 4.8% of it. On larger projects plenty of customers buy the materials themselves, and those are shown on the quote at no charge.
- Are you insured, and do you hold a contractor license?
- Fully insured, and a W-9 and a certificate of insurance go out with every signed quote without being asked for. On licensing we are direct, because it is the question that matters and the one most trade websites blur: the Michigan residential builder license is not held and no contractor license is claimed or implied. What is done in-house on electrical and plumbing is repair and like-for-like replacement on what already exists. New circuits, panels, service upgrades, water-heater replacement and anything else inside a licensed trade’s scope is performed by the licensed contractor whose license covers it — named as such on the quote, priced as their own line, and permitted in their name. The work still gets done; it gets done by the license it needs.
Need heating & cooling quoting?
Tell us what is wrong and we will come and look — no trip charge, no call-out minimum and no diagnostic fee. You get a fixed price in writing with the exclusions listed as plainly as the inclusions, and materials at cost with the receipts attached.